Coupled finite‐element simulation of injection well testing in unconsolidated oil sands reservoir     

Bin Xu  Ron C.K. Wong 《国际地质力学数值与分析法杂志》2013,37(18):3131-3149

This paper presents a finite‐element (FE) model for simulating injection well testing in unconsolidated oil sands reservoir. In injection well testing, the bottom‐hole pressure (BHP) is monitored during the injection and shut‐in period. The flow characteristics of a reservoir can be determined from transient BHP data using conventional reservoir or well‐testing analysis. However, conventional reservoir or well‐testing analysis does not consider geomechanics coupling effects. This simplified assumption has limitations when applied to unconsolidated (uncemented) oil sands reservoirs because oil sands deform and dilate subjected to pressure variation. In addition, hydraulic fracturing may occur in unconsolidated oil sands when high water injection rate is used. This research is motivated in numerical modeling of injection well testing in unconsolidated oil sands reservoir considering the geomechanics coupling effects including hydraulic fracturing. To simulate the strong anisotropy in mechanical and hydraulic behaviour of unconsolidated oil sands induced by fluid injection in injection well testing, a nonlinear stress‐dependent poro‐elasto‐plastic constitutive model together with a strain‐induced anisotropic permeability model are formulated and implemented into a 3D FE simulator. The 3D FE model is used to history match the BHP response measured from an injection well in an oil sands reservoir. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

河嘉203H含硫水平气井测试工艺实践     

唐波  乔智国  陈伟  叶翠莲 《海洋地质译丛》2010,(4):103-105

河嘉203H井是川东北河坝构造嘉二高压含硫气藏部署的第一口水平井,具有埋藏深、储层压力高、腐蚀分压高、地层易漏失、水平井压井堵漏难度大的特点,通过开展工具优选、管柱结构优化设计、流程优选,并对替浆、放喷油嘴控制及压井等主要工序的施工工艺参数进行研究,形成了河坝嘉二含硫气藏水平井测试工艺技术体系,并在河嘉203H井获得成功应用。  相似文献   

Seasonal evaluation of rainfall estimation by four cumulus parameterization schemes and their sensitivity analysis     

Asnor Muizan Ishak  Michaela Bray  Renji Remesan  Dawei Han 《水文研究》2012,26(7):1062-1078

Sustainable water resources management require scientifically sound information on precipitation, as it plays a key role in hydrological responses in a catchment. In recent years, mesoscale weather models in conjunction with hydrological models have gained great attention as they can provide high‐resolution downscaled weather variables. Many cumulus parameterization schemes (CPSs) have been developed and incorporated into three‐dimensional Pennsylvania State University/National Center for Atmospheric Research (PSU/NCAR) mesoscale model 5 (MM5). This study has performed a comprehensive evaluation of four CPSs (the Anthes–Kuo, Grell, Betts–Miller and Kain–Fritsch93 schemes) to identify how their inclusion influences the mesoscale model's precipitation estimation capabilities. The study has also compared these four CPSs in terms of variability in rainfall estimation at various horizontal and vertical levels. For this purpose, the MM5 was nested down to resolution of 81 km for Domain 1 (domain span 21 × 81 km) and 3 km for Domain 4 (domain span 16 × 3 km), respectively, with vertical resolutions at 23, 40 and 53 vertical levels. The study was carried out at the Brue catchment in Southwest England using both the ERA‐40 reanalysis data and the land‐based observation data. The performances of four CPs were evaluated in terms of their ability to simulate the amount of cumulative rainfall in 4 months in 1995 representing the four seasonal months, namely, January (winter), March (spring), July (summer) and October (autumn). It is observed that the Anthes–Kuo scheme has produced inferior precipitation values during spring and autumn seasons while simulations during winter and summer were consistently good. The Betts–Miller scheme has produced some reasonable results, particularly at the small‐scale domain (3 km grid size) during winter and summer. The KF2 scheme was the best scheme for the larger‐scale (81 km grid size) domain during winter season at both 23 and 53 vertical levels. This scheme tended to underestimate rainfall for other seasons including the small‐scale domain (3 km grid size) in the mesoscale. The Grell scheme was the best scheme in simulating rainfall rates, and was found to be superior to other three schemes with consistently better results in all four seasons and in different domain scales. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

油企业抗震防灾规划信息管理系统的设计          下载免费PDF全文

《地震地质》1999,21(3):285

基于石油企业抗震防灾工作对网络与数据库的信息管理系统的需求，对数据库产品进行了简要分析，并根据石油企业抗震防灾规划的需求和信息管理的一般模式，提出了石油企业抗震防灾规划信息计算机管理系统的设想。认为，以 Ｍｉｃｒｏｓｏｆｔ Ａｃｃｅｓｓ 数据库软件为基础，利用 Ｖ Ｂ或 Ｖ Ｃ等可视化前端应用开发工具，是目前比较好的方案，它将使石油企业抗震防灾规划工作在办公自动化方面迈向新的台阶  相似文献   

Efficiency verification of a horizontal flow barrier via flowmeter tests and multilevel sampling     

M. Mastrocicco  C. Sbarbati  N. Colombani  M. Petitta 《水文研究》2013,27(17):2414-2421

The remediation strategy for an industrial site located in a coastal area involves a pump and treat system and a horizontal flow barrier (HFB) penetrating the main aquifer. To validate the groundwater flow conceptual model and to verify the efficiency of the remediation systems, we carried out piezometric measurements, slug tests, pumping tests, flowmeter tests and multilevel sampling. Flowmeter tests are used to infer vertical groundwater flow directions, and base exchange index is used to infer horizontal flow directions at a metric scale. The selected wells are located both upstream and downstream of the HFB. The installation of the HFB produced constraints to the groundwater flow. A stagnant zone of contaminated freshwater floating over the salt wedge in the upper portion of the aquifer is detected downstream of the HFB. This study confirms that the adopted remediation system is efficiently working in the area upstream of the HFB and even downstream in the bottom part of the aquifer. At the same time, it has also confirmed that hot spots are still present in stagnant zones located downstream of the HFB in the upper part of the aquifer, requiring a different approach to accomplish remediation targets. The integrated approach for flow quantification used in this study allows to discriminate the direction and the magnitude of groundwater fluxes near an HFB in a coastal aquifer. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Comprehensive Marine Observing Experiment Based on High-Altitude Large Unmanned Aerial Vehicle(South China Sea Experiment2020 of the “Petrel Project”)     

Xuefen ZHANG  Liangxu LI  Rongkang YANG  Ran GUO  Xia SUN  Jianping LUO  Hongbin CHEN  Daxin LIU  Kebing TANG  Wenwu PENG  Xiaodong HAN  Qiyun GUO  Xiaoxia LI  Xikun FEI 《大气科学进展》2021,38(4):531-537

In collaboration with 12 other institutions, the Meteorological Observation Center of the China Meteorological Administration undertook a comprehensive marine observation experiment in the South China Sea using the Yilong-10 high-altitude large unmanned aerial vehicle(UAV). The Yilong-10 UAV carried a self-developed dropsonde system and a millimeter-wave cloud radar system. In addition, a solar-powered unmanned surface vessel and two drifting buoys were used. The experiment was further supported by an intelligent, reciprocating horizontal drifting radiosonde system that was deployed from the Sansha Meteorological Observing Station, with the intent of producing a stereoscopic observation over the South China Sea. Comprehensive three-dimensional observations were collected using the system from 31 July to2 August, 2020. This information was used to investigate the formation and development processes of Typhoon Sinlaku(2020). The data contain measurements of 21 oceanic and meteorological parameters acquired by the five devices, along with video footage from the UAV. The data proved very helpful in determining the actual location and intensity of Typhoon Sinlaku(2020). The experiment demonstrates the feasibility of using a high-altitude, large UAV to fill in the gaps between operational meteorological observations of marine areas and typhoons near China, and marks a milestone for the use of such data for analyzing the structure and impact of a typhoon in the South China Sea. It also demonstrates the potential for establishing operational UAV meteorological observing systems in the future, and the assimilation of such data into numerical weather prediction models.  相似文献   

On the Importance of High-Resolution in Large-Scale Ocean Models     

Eric P.CHASSIGNET  Xiaobiao XU 《大气科学进展》2021,38(10):1621-1634

Eddying global ocean models are now routinely used for ocean prediction, and the value-added of a better representation of the observed ocean variability and western boundary currents at that resolution is currently being evaluated in climate models. This overview article begins with a brief summary of the impact on ocean model biases of resolving eddies in several global ocean–sea ice numerical simulations. Then, a series of North and Equatorial Atlantic configurations are used to show that an increase of the horizontal resolution from eddy-resolving to submesoscale-enabled together with the inclusion of high-resolution bathymetry and tides significantly improve the models' abilities to represent the observed ocean variability and western boundary currents. However, the computational cost of these simulations is extremely large, and for these simulations to become routine, close collaborations with computer scientists are essential to ensure that numerical codes can take full advantage of the latest computing architecture.  相似文献   

CWRF对青藏高原气温和降水模拟效果的综合评估          下载免费PDF全文

徐蓉蓉  梁信忠  段明铿 《大气科学学报》2021,44(1):104-117

利用CWRF(Climate-Weather Research and Forecasting model)对中国区域气候的31 a多物理集合模拟试验,分析了该模式对青藏高原气温和降水的模拟效果及其对水平分辨率和物理过程参数化方案的敏感性。结果表明:1)CWRF降尺度全面改善了全球模式对高原气温和降水的模拟,使气温年循环的均方根误差减小近1℃,月降水量年循环的均方根误差减小10~40 mm,同时显著提高了各月气温和降水与实测资料年际变化的相关系数,最高提升0.6;2)模式分辨率对降水模拟有显著影响,不同分辨率模拟降水差异高达60 mm(54%),模拟偏差随分辨率提高先降低后上升,转折在30 km左右;3)物理过程参数化方案对气温和降水模拟影响显著,不同方案模拟的各月平均气温相差1~4℃,夏季各月降水量相差20~100 mm,其中对气温模拟影响最大的是辐射方案,对降水影响最大的是积云方案。本文为CWRF局地优化对物理参数化及水平分辨率等如何选择提供了依据。  相似文献   

广州地铁五号线第三方水平位移监测的实践   总被引：4，自引：0，他引：4  

黄泽健 《测绘工程》2006,15(5):61-64

通过广州地铁五号线土建施工第三方监测实践,介绍并分析TCA2003智能型全站仪在极坐标法水平位移监测中的适用性,提出平面位移量的计算方法,总结了第三方水平位移监测的方法和技术要点。  相似文献   

埃尔米特插值函数在公路平面线形设计中的应用     

文畅平 《测绘科学》2007,32(3):149-150

三次样条函数在公路平面线形设计中有广泛的应用,但由于没有统一的函数表达式且计算量大,因而在应用上不便。埃尔米特插值函数的特点决定其能很好地逼近被插值函数,且计算过程简便。公路平面线形实例设计表明,三次埃尔米特插值函数用于公路平面线形设计中,能够满足路线设计规范(JTJ011-94)的要求,其设计结果与三次样条函数设计结果接近。本研究建立了公路平面线形设计的埃尔米特插值函数方法,可供公路平面线形设计工作参考。  相似文献